[BEST SELLER] Berger-Seidle AquaSeal CeramicStar Matt Buy 3 Get 1 Combo EOFY Deal

🔥3+1 DEAL + EXTRA DISCOUNT

Buy 3 x CeramicStar and get 1 x FlexPrimer FREE.
The perfect system for durability, adhesion, and a flawless result.

What you get:
• 3 × AquaSeal CeramicStar Matt 5.5L (incl. hardener)
• 1 × AquaSeal FlexPrimer 5L FREE (RRP $154)
• PLUS: An Extra EOFY Discount applied!

Why tradies choose this combo:
• Premium German-engineered finish (Berger-Seidle)
• Fast system = quicker turnaround on jobs
• Proven durability for high-traffic floors

⚠️ Limited EOFY stock – once it’s gone, it’s gone
EOFY special items are not eligible for refunds.

AquaSeal CeramicStar Matt – 5.5 L (with Hardener)

Two component, water based, premium class polyurethane floor finish with ceramic technology.

AquaSeal CeramicStar is a high performance 2K water based PU finish for hardwood floors.
It has low viscosity for easy roller application and very high abrasion resistance thanks to ceramic components in the formula. Coated floors can typically be put back into use after about 12 hours under standard conditions.

CeramicStar is also suitable for renovation work and helps block old substances that may be present in the floor.

• Size: 5.5 L (includes hardener)
• Sheen in this deal: Matt only
• Coverage: approx. 10 m² per litre (depending on wood species and application method)
• Recommended primer: AquaSeal FlexPrimer

Mixing and application

• Mix AquaSeal CeramicStar with AquaSeal Hardener at a 10:1 ratio shortly before use
• Stir thoroughly, then allow the mix to rest for about 10 minutes before application
• Pot life is approximately 2 hours. The mixture may remain liquid longer, but should not be used after 2 hours as the dried film properties will be affected
• Only mix as much as you can use within the pot life. For smaller quantities, use the Berger Seidle 1 L mix bottle
• Apply a total of 3 coats by roller or brush
• Highly absorbent species such as beech, maple and ash must not be trowelled, only roller coated

Application tips

• Compared to conventional solvent based finishes, CeramicStar should be applied in slightly more generous coats
• Do not overwork or excessively spread the finish with the roller

Drying

• To avoid excessive swelling pressure in the wood, only one roller application per day is recommended so the timber can release absorbed water
• Under normal conditions (15–23 °C, normal humidity) the finish can be sanded and carefully walked on after about 3–4 hours
• Poor ventilation, low temperature, high humidity or thick coats will delay drying
• Under standard conditions the finished floor can usually be put into use after about 12 hours
• Do not cover with rugs or apply care products for at least 7 days

AquaSeal FlexPrimer – 5 L

High quality water based acrylate primer designed to reduce edge bonding under AquaSeal top coats.

AquaSeal FlexPrimer gives a medium level of grain enhancement with a neutral colour look. It can be used on all floors that have been sanded back to bare wood and is especially useful on porous or absorbent species.

• Size: 5 L
• Coverage: approx. 10 m² per litre (depending on surface and application method)
• Suitable as a base for:
  • Aqua-Seal SmartHome Matt
  • Aqua-Seal EcoGold
  • Aqua-Seal NordicWhite
  • Aqua-Seal CeramicStar
  • Aqua-Seal SmartStar
  • Aqua-Seal NaturalWhite

Application

• Apply evenly by roller to sanded raw wood, especially on porous or absorbent species
• On tight grained species, application across the boards by trowel is also possible
• Clean tools with water after use

Drying

• Under normal conditions (23 °C, 50% RH) a top coat can be applied after about 1 hour
• As with the finish, only one roller coat per day is recommended to allow the wood to release absorbed moisture
• Limited ventilation, low temperature or increased coat thickness will delay drying